Cylinder head and sealing

Cylinder heads, gaskets, valve covers, oil pans and intake manifolds for European and Japanese passenger cars: the parts that close the top and the bottom of the engine, keep compression, oil and coolant apart, and feed the air to the cylinders, catalogued by OE reference.

MONTTRON cylinder head and sealing parts: a cylinder head, a multi-layer head gasket, a valve cover, an oil pan and an intake manifold

Product types

  • MONTTRON cylinder head: a bare aluminium head seen from the side, with the valve guides, the camshaft bearing saddles and the intake ports machined

    Cylinder heads

    Cylinder heads that close the top of the cylinder block: the castings that carry the combustion chambers, the valves with their seats and guides, and the camshafts, made to the dimensions and the faces of the original, for European and Japanese passenger cars, identified by OE reference.

  • MONTTRON gasket: a multi-layer steel cylinder head gasket for a four-cylinder engine, with the four bore openings and the coolant and oil passages

    Gaskets

    Cylinder head gaskets and the other gaskets that seal the joints of the engine: the head gasket between head and block that keeps compression, oil and coolant apart, and the gaskets of the valve cover, the oil pan and the intake manifold, for European and Japanese passenger cars, identified by OE reference.

  • MONTTRON valve cover: a black plastic cam cover for a four-cylinder engine, with the four spark plug wells, the oil filler cap and the breather connection

    Valve covers

    Valve covers (cam covers) that close the top of the cylinder head over the camshafts and the valvetrain, hold the oil in and keep dirt out, with their gaskets and the seals of the spark plug wells, for European and Japanese passenger cars, identified by OE reference.

  • MONTTRON oil pans: a cast aluminium upper sump section and a pressed steel oil pan with its drain plug

    Oil pans

    Oil pans (sumps) that close the bottom of the engine and hold the oil reserve, with the drain plug seat, the baffles and the pick-up clearance of the original, in pressed steel or cast aluminium as the engine was built, for European and Japanese passenger cars, identified by OE reference.

  • MONTTRON intake manifold: a black plastic manifold for a four-cylinder engine, with the throttle body flange, the four runners and the port flange with its gasket

    Intake manifolds

    Intake manifolds that carry the air, or the air and fuel, from the throttle body to the intake port of each cylinder in equal measure, in moulded plastic or aluminium as the original, with their gaskets and runner flaps where the engine has them, for European and Japanese passenger cars, identified by OE reference.